Yayınlar

Yayınlar

LISTEN

Types

Dates

 to 

2023-2024

  • Makaleler
    Javidrad, Hamidreza and Aydin, Huseyin and Karakaş, Burak and Alptekin, Sertaç and Kahraman, Aylin Sahin and Koç, Bahattin (2024) "Process parameter optimization for laser powder directed energy deposition of Inconel 738LC", Optics and Laser Technology, Vol.176 (SCI)
    Ebrahimpour Ahmadi, Vahid and Güler, Tayfun and Amin, Saifa and Apak, Ahmet Muhtar and Apak, Alper and Parlak, Murat and Tastan, Umur and Kaya, İsmet İnönü and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Effect of graphene coating on flow boiling in a minichannel at sub-atmospheric pressures", International Journal of Heat and Mass Transfer, Vol.229 (SCI)
    Ozdilek, Emin Emre and Özçakar, Egecan and Muhtaroglu, Nitel and Simsek, Ugur and Gulcan, Orhan and Kızıltaş, Güllü (2024) "A finite element based homogenization code in python: HomPy", Advances in Engineering Software, Vol.194 (SCI)
    Rekuviene, Regina and Saeidiharzand, Shaghayegh and Mažeika, Liudas and Samaitis, Vykintas and Jankauskas, Audrius and Sadaghiani, Abdolali Khalili and Gharıb, Ghazaleh and Muganlı, Zülal and Koşar, Ali (2024) "A review on passive and active anti-icing and de-icing technologies", Applied Thermal Engineering, Vol.250 (SCI)
    Önder, Melike Nur and Gülgün, Mehmet Ali and Papila, Melih (2024) "Piezoresistivity analyses of GNP-filled composite piezoresistor under cycling loading and correlation with the Monte Carlo percolation model", Composites Science and Technology, Vol.254 (SCI)
    Maleki, Mohammadamin and Rokhsar Talabazar, Farzad and Koşar, Ali and Ghorbani, Morteza (2024) "On the spatio-temporal dynamics of cavitating turbulent shear flow over a microscale backward-facing step: a numerical study", International Journal of Multiphase Flow, Vol.177 (SCI)
    Ay, Ayşe and Arel, Işık and Dumanli, Ahu Gümrah and Akbulut, Özge (2024) "Coaxial direct ink writing of core-shell meshes enables zero-waste room temperature encapsulation of multivariate fertilizers", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.691 (SCI)
    Mesüm, Oğuz and Atılgan, Ali Rana and Kocuk, Burak (2024) "A stochastic programming approach to the antibiotics time machine problem", Mathematical Biosciences, Vol.372 (SCI)
    Can, Faruk and Akkaş Moradi, Tuğçe and Bekler, Sevinç Yağmur and Takmaklı, Selma and Uzun, Lokman and Özaydın İnce, Gözde (2024) "Selective determination of an ovarian cancer biomarker at low concentrations with surface imprinted nanotube based chemosensor", Bioelectrochemistry, Vol.157 (SCI)
    Fallah, Ali and Saleem, Qandeel and Koç, Bahattin (2024) "Assessment of mechanical properties and shape memory behavior of 4D printed continuous fiber-reinforced PETG composites", Composites Part A: Applied Science and Manufacturing, Vol.181 (SCI)
    Al-Nadhari, Abdulrahman Saeed Abdulqader and Kheyabani, Aryan and Kefal, Adnan and Topal, Serra and Yıldız, Mehmet (2024) "Effective multiscale structural analysis of thick sandwich structures with 3D woven composite face sheets and a soft core based on coupled micromechanics and refined zigzag theory", Composite Structures, Vol.337 (SCI)
    Abdelrahman, Amr Mustafa and Tebyani, Seyedreza and Rokhsar Talabazar, Farzad and Tabar, Saba Aghdam and Berenji, Nastaran Rahimzadeh and Sheibaniaghdam, Araz and Koyuncu, Ismail and Koşar, Ali and Guven, Huseyin and Ersahin, Mustafa Evren and Ghorbani, Morteza and Ozgun, Hale (2024) "The flow pattern effects of hydrodynamic cavitation on waste activated sludge digestibility", Chemosphere, Vol.357 (SCI)
    Dereli Can, Gamze and Tunca Atay, Merve and Egil, Abdurrahim Can and Güney, Eda and Shemshad, Sepideh and Taner, Gokce and Asa, Sibel Cinar and Ari, Ferda and Özaydın İnce, Gözde (2024) "Surface coatings of contact lenses for cell sheet transplantation", Journal of Applied Polymer Science, Vol.141, No.23 (SCI)
    Özyiğit, Samet and Mehdipour Aghbolagh, Mostafa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Tabrizi, Arvin T. and Doğan, Semih and Dericiler, Kuray and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2024) "A comprehensive experimental study on the effects of hexagonal boron nitride particle size and loading ratio on thermal and mechanical performance in epoxy composites", Journal of Composite Materials, Vol.58, No.13 (SCI)
    Mohammadilooey, Mandana and Parizad Benam, Behnam and Ateş, Ayşenur and Yagcı, Vedat and Çaglar Malyemez, Muhammed and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Multiple hot spot cooling with flow boiling of HFE-7000 in a multichannel pin fin heat sink", Applied Thermal Engineering, Vol.247 (SCI)
    Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2024) "Enhancing interlaminar bonding quality estimation in laser-assisted fiber placement of CF/PEKK composites: a correction factor approach for improved prediction of intimate contact", Composites Part A: Applied Science and Manufacturing, Vol.181 (SCI)
    Vafaei, Mostafa and Taşdelen, Melih Can and Sayar Irani, Farid and Yapıcı, Murat Kaya (2024) "Performance evaluation of a MEMS-compatible flexible graphene bolometer for chamberless NDIR gas sensing", IEEE Sensors Letters, Vol.8, No.6 (ESCI)
    Bütün, İsmail and Çelik, Süleyman and Dönmez, Koray Bahadır and Yürüm, Alp and Alkan Gürsel, Selmiye and Koşar, Ali (2024) "The effect of current collectors on polymer-based energy-generating units inspired by the electric organs of eels", Journal of Energy Storage, Vol.90, No.Part A (SCI)
    Karimzadehkhoei, Jalal and Sorayani Bafqi, Mohammad Sajad and Dericiler, Kuray and Doustdar, Omid and Saner Okan, Burcu and Koşar, Ali and Sadaghiani, Ali (2024) "Upcycled graphene nanoplatelets integrated fiber-based Janus membranes for enhanced solar-driven interfacial steam generation". Published Online First //dx.doi.org/10.1039/D4LF00082J
    Paksoy, Aybike and Yıldırım, İpek Deniz and Arabi, Seyedehnegar and Güngör, Ahmet and Erdem, Emre and Balcı-Çağıran, Özge (2024) "Enhanced performance and cycling behavior in symmetric supercapacitors developed by pure HfB2 and HfB2-SiC composites", Journal of Alloys and Compounds, Vol.983 (SCI)
    Colak, Tuluhan Olcayto and Altaf, Cigdem Tuc and Yesilbag, Fatma Nur Tuzluca and Yesilbag, Yasar Ozkan and Yıldırım, İpek Deniz and Erdem, Emre and Bakan Mısırlıoğlu, Feray and Sankir, Nurdan Demirci and Sankir, Mehmet (2024) "Photo-supercapacitors based on zinc oxide/MXene paper dual acting electrodes", Journal of Energy Storage, Vol.86, No.Part B (SCI)
    Akhlaghi, Omid and Camposilvan, Erik and Garnier, Vincent and Goharibajestani, Zahra and Khabbazabkenar, Sirous and Ow-Yang, Cleva W. and Jorand, Yves and Gremillard, Laurent and Chevalier, Jérôme (2024) "Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics". Published Online First https://dx.doi.org/10.1016/j.dental.2024.05.007
    Seçer, Ragıp Orkun and Nedjad, Syamak Hossein and Yıldız, Mehmet (2024) "Extending a phase field model of polycrystalline solidification for simulating grain evolution in metal additive manufacturing", Computational Materials Science, Vol.240 (SCI)
    Farrokhnemoun, Darya and Sajjadivand, Seyyedehshahrzad and Parapari, Sorour Semsari and Sturm, Saso and Ow-Yang, Cleva W. and Gülgün, Mehmet Ali (2024) "Influence of sodium hydroxide on phase transformation of gamma alumina to alpha alumina", Journal of the American Ceramic Society, Vol.107, No.5, 3451-3463 (SCI)
    Rekuvienė, Regina and Samaitis, Vykintas and Jankauskas, Audrius and Sadaghiani, Abdolali Khalili and Saeidiharzand, Shaghayegh and Koşar, Ali (2024) "Early-stage ice detection utilizing high-order ultrasonic guided waves", Sensors, Vol.24, No.9 (SCI)
    Ateş, Ayşenur and Yağcı, Vedat and Malyemez, Muhammed Çağlar and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Flow dynamics characteristics of flow boiling in minichannels with distributed pin fin structures", International Journal of Thermal Sciences, Vol.199 (SCI)
    Zafar, Salman and Saleem, Qandeel and Şaş Çaycı, Hatice Sinem and Bayazıt, Mustafa Kemal (2024) "Numerical investigation of heat transfer and temperature distribution in a microwave-heated heli-flow reactor and experimental validation", Chemical Engineering Journal, Vol.488 (SCI)
    Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2024) "Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: comparative analysis of atmospheric plasma activation and conventional treatments", Composites Part A: Applied Science and Manufacturing, Vol.180 (SCI)
    Zabara, Mohammed Ahmed and Katırcı, Gökberk and Civan, Fazlı E. and Yürüm, Alp and Alkan Gürsel, Selmiye and Ülgüt, Burak (2024) "Insights into charge transfer dynamics of Li batteries through temperature-dependent electrochemical impedance spectroscopy (EIS) utilizing symmetric cell configuration", Electrochimica Acta, Vol.485 (SCI)
    Berksöz, Melike and Atılgan, Canan (2024) "Allosteric modulation of fluorescence revealed by hydrogen bond dynamics in a genetically encoded maltose biosensor". Published Online First https://dx.doi.org/10.1002/prot.26688
    Güney, Eda and Karimzadehkhoei, Jalal and Şengül, Bengü Süeda and Can, Faruk and Özaydın İnce, Gözde (2024) "Functional copolymer coatings on electrospun fibers via photo-initiated chemical vapor deposition", Journal of Applied Polymer Science, Vol.141, No.15 (SCI)
    Karagoz, Emine and Tuc Altaf, Cigdem and Tuzluca Yesilbag, Fatma Nur and Yesilbag, Yasar Ozkan and Erdem, Emre and Bakan Mısırlıoğlu, Feray and Demirci Sankir, Nurdan and Sankir, Mehmet (2024) "Self-powered quasi-solid-state photoelectrochemical photodetectors based on MXene paper modified by ZnO nanostructured architecture", ACS Applied Nano Materials, Vol.7, No.7, 7709-7719 (SCI)
    Daskalakis, Evangelos and Huang, Boyang and Hassan, Mohamed H. and Omar, Abdalla M. and Vyas, Cian and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2024) "In vitro evaluation of pore size graded bone scaffolds with different material composition", 3D Printing and Additive Manufacturing, Vol.11, No.2, E718-E730 (SCI)
    Samancoğlu, Umut Ege and Koşar, Ali and Cetkin, Erdal (2024) "Optimization of Y-shaped micro-mixers with a mixing chamber for increased mixing efficiency and decreased pressure drop", ASME Journal of Heat and Mass Transfer, Vol.146, No.4 (SCI)
    Arıtürk, Gizem Semra and Bilge, Kaan and Seven, Senem Avaz and Menceloğlu, Yusuf Z. (2024) "Morphological adaptation of expanded vermiculite in polylactic acid and polypropylene matrices for superior thermoplastic composites", Polymer Composites, Vol.45, No.6, 5043-5050 (SCI)
    Şahin Dündar, Gülayşe and Saner Okan, Burcu (2024) "Utilizing upcycled graphene nanoplatelet-coated glass fibers as a performance booster and compatibilizer for enhanced mechanical performance of polypropylene/glass fiber/graphene nanoplatelet composites", ACS Omega, Vol.9, No.15, 17432-17445 (SCI)
    Korkut, Sevde and Ormanci-Acar, Türkan and Keskin, Basak and Ağtaş, Meltem and Karahan, Özlem and Demir, Tuğba U. and Ünal, Serkan and Menceloğlu, Yusuf Z. and Koyuncu, Ismail (2024) "Effect of photocatalytic pretreatment on the membrane performance in nanofiltration of textile wastewater", Water, Air, and Soil Pollution, Vol.235, No.5 (SCI)
    Umar, Muhammad and Sayar Irani, Farid and Mirbakht, Seyed Sajjad and Yapıcı, Murat Kaya (2024) "Contact-based and proximally thermosensitive few-layer graphene Ntc thermistors with highly fast switching behavior", Advanced Electronic Materials, Vol.10, No.4 (SCI)
    Zandonà, Chiara and Roberti, Andrea and Costanzi, Davide and Gül, Burçin and Akbulut, Özge and Fiorini, Paolo and Calanca, Andrea (2024) "A comparison between kinematic models for robotic needle insertion with application into transperineal prostate biopsy", Technologies, Vol.12, No.3 (ESCI)
    Durmuş Sayar, Ayşe and Tansan, Murat and Çinko Çoban, Tuğçe and Serttan, Dilay and Dızman, Bekir and Yıldız, Mehmet and Ünal, Serkan (2024) "Incorporation of graphene nanoplatelets into fiber-reinforced polymer composites in the presence of highly branched waterborne polyurethanes", Polymers, Vol.16, No.6 (SCI)
    Güngör, Ahmet and Akgül, Gökçen and Bakan Mısırlıoğlu, Feray and Erdem, Emre (2024) "Chemically exfoliated refined carbon from industrial tea waste for capacitive energy storage", Physica Scripta, Vol.99, No.3 (SCI)
    Güngör, Ahmet and Çolak, Süleyman Gökhan and Alaş, Melis Özge and Genç, Rükan and Erdem, Emre (2024) "Polyaniline:Cu2ZnSnS4 (PANI:CZTS) nanocomposites as electrodes in all-in-one supercapacitor devices", Electrochimica Acta, Vol.480 (SCI)
    Mokhtari, Pozhhan and Hassannezhad, Kosar and Semsari Parapari, Sorour and Akyol, Yasemin and Gülgün, Mehmet Ali and Kriven, Waltraud M. (2024) "Calcined schist as promising ordinary Portland cement substitution: C3", International Journal of Ceramic Engineering and Science, Vol.6, No.2 (ESCI)
    Mokhtari, Pozhhan and Hassannezhad, Kosar and Bundur, Zeynep Basaran and Dönmez, Sezen and Gülgün, Mehmet Ali and Kriven, Waltraud M. (2024) "Optimization of Ca/Si ratio in schists to enhance the pozzolanic supplementary cementitious material for OPC blending", International Journal of Ceramic Engineering and Science, Vol.6, No.2 (ESCI)
    Kheyabani, Aryan and Ali, Hafiz Qasim and Kefal, Adnan and Yıldız, Mehmet (2024) "Coupling of isogeometric higher-order RZT and parametric HFGMC frameworks for multiscale modeling of sandwich laminates: theory and experimental validation", Aerospace Science and Technology, Vol.146 (SCI)
    Zoghipour, Pouya and Kefal, Adnan and Yıldız, Mehmet (2024) "Structural analysis of sandwich plates with variable stiffness composite skins and functionally graded cores using refined zig-zag theory". Published Online First https://dx.doi.org/10.1080/15376494.2024.2323098
    Ozalp, A. and Okuyucu, C. and Koç, Bahattin and El-Atwani, O. and Aydogan, E. (2024) "Development and directed energy deposition of high strength Hf5Mo15Nb35Ta25Ti20 refractory high entropy alloys", Materials Characterization, Vol.209 (SCI)
    Javidrad, Hamidreza and Koç, Bahattin and Bayraktar, Hakan and Simsek, Ugur and Gunaydin, Kadir (2024) "Fatigue performance of metal additive manufacturing: a comprehensive overview", Virtual and Physical Prototyping, Vol.19, No.1 (SCI)
    Joudivand Sarand, Mohammad Hasan and Mısırlıoğlu, Burç (2024) "A physics-based plasticity study of the mechanism of inhomogeneous strain evolution in dual phase 600 steel", International Journal of Plasticity, Vol.174 (SCI)
    Şahin Dündar, Gülayşe and Saner Okan, Burcu (2024) "Entropy barrier mitigation and harnessing localized upcycled graphene nanoplatelets in polypropylene/high-density polyethylene nanoblends". Published Online First https://dx.doi.org/10.1007/s10904-024-03033-3
    Abdali, Amirreza and Hossein Nedjad, Syamak and Hamed Zargari, Habib and Saboori, Abdollah and Yıldız, Mehmet (2024) "Predictive tools for the cooling rate-dependent microstructure evolution of AISI 316L stainless steel in additive manufacturing", Journal of Materials Research and Technology, Vol.29, 5530-5538 (SCI)
    Arlı, Cihan and Atılgan, Ali Rana and Mısırlıoğlu, Burç (2024) "Extended contributions to the pyroelectric effect in ferroelectric thin films", Applied Physics Letters, Vol.124, No.6 (SCI)
    Karamustafa, Ayşenur and Sözer, Sözer and Oskay, Kürşad Oğuz and Aktürk, Merve and Erdem, Emre and Akgül, Gökçen (2024) "Erratum to: Improving the electrochemical energy storage capacity of the renewable carbon derived from industrial tea waste (Russian Journal of Electrochemistry, (2022), 58, 9, (844-854), 10.1134/S1023193522090099)", Russian Journal of Electrochemistry, Vol.60, No.2, 155-156 (SCI)
    Sadeghi, Ebrahim and Chamani, Sanaz and Yıldırım, İpek Deniz and Erdem, Emre and Peighambardoust, Naeimeh Sadat and Aydemir, Umut (2024) "In situ design of a nanostructured interface between NiMo and CuO derived from metal-organic framework for enhanced hydrogen evolution in alkaline solutions", ACS Applied Materials and Interfaces, Vol.16, No.8, 10078-10092 (SCI)
    Ebrahimi, Elnaz and Irfan, Muhammad and Kocak, Yusuf and Rostas, Arpad Mihai and Erdem, Emre and Ozensoy, Emrah (2024) "Origins of the photocatalytic NOx oxidation and storage selectivity of mixed metal oxide photocatalysts: prevalence of electron-mediated routes, surface area, and basicity", Journal of Physical Chemistry C, Vol.128, No.4, 1669-1684 (SCI)
    Kahraman, Abdullah and Socie, Etienne and Nazari, Maryam and Kazazis, Dimitrios and Aktürk, Merve and Kabanova, Victoria and Biasin, Elisa and Smolentsev, Grigory and Grolimund, Daniel and Erdem, Emre and Moser, Jacques E. and Cannizzo, Andrea and Bacellar, Camila and Milne, Christopher (2024) "Tailoring p-type behavior in ZnO quantum dots through enhanced sol-gel synthesis: mechanistic insights into zinc vacancies", Journal of Physical Chemistry Letters, Vol.15, No.6, 1755-1764 (SCI)
    Sharbati, Pouya and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "On the effect of static and dynamic contact angles on humid air condensation heat transfer", International Journal of Heat and Mass Transfer, Vol.219 (SCI)
    Dericiler, Kuray and Saner Okan, Burcu (2024) "A comprehensive dimensional analysis of waste-derived reinforcements in interface interactions with semi-bio-based PA6,10 composites". Published Online First https://dx.doi.org/10.1002/pc.28210
    Başkan Bayrak, Havva and Kocanali, Atakan and Saner Okan, Burcu (2024) "Selective thermal recycling for graphene growth on natural substrates: a comparative study on life cycle assessment, energy consumption, and mechanical performance in recompounding", Journal of Applied Polymer Science, Vol.141, No.7 (SCI)
    Isik, Murat and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Yıldız, Mehmet and Aydoğan, Eda and Koç, Bahattin (2024) "The effect of additively and subtractively created center internal features on microstructure and mechanical performance of inconel-718 parts", Rapid Prototyping Journal, Vol.30, No.2, 287-304 (SCI)
    Alan, Salih and Shaban, Nefize and Kızıltaş, Güllü and Bediz, Bekir (2024) "Concurrent stacking sequence and layout optimization of stiffened composite plates using a spectral element method and an index-based optimization technique", Composite Structures, Vol.327 (SCI)
    Güngör, Ahmet and Bakan-Misirlioglu, Feray and Genç Altürk, Rükan and Erdem, Emre (2024) "Elevating supercapacitor performance: enhancing electrochemical efficiency with transition metal-doped polyaniline electrode", Journal of Energy Storage, Vol.76 (SCI)
    Alaş, Melis Özge and Güngör, Ahmet and Aktürk, Merve and Erdem, Emre and Genç, Rükan (2024) "Unlocking the full potential of citric acid-synthesized carbon dots as a supercapacitor electrode material via surface functionalization", Nanoscale, Vol.16, No.2, 719-733 (SCI)
    Kömürcü, Emre and Kefal, Adnan and Abdollahzadeh, M. A. and Basoglu, M. F. and Kısa, Erdal and Yıldız, Mehmet (2024) "Towards composite suspension control arm: conceptual design, structural analysis, laminate optimization, manufacturing, and experimental testing", Composite Structures, Vol.327 (SCI)
    Kırlıoğlu, Ahmet Can and Rajabalizadeh Mojarrad, Naeimeh and Alkan Gürsel, Selmiye and Güler, Enver and Yarar Kaplan, Begüm (2024) "New generation radiation-grafted PVDF-g-VBC based dual-fiber electrospun anion exchange membranes", International Journal of Hydrogen Energy, Vol.51, No.Part:D, 1390-1401 (SCI)
    Acar, Anıl Ahmet and Daskalakis, Evangelos and Bartolo, Paulo and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Koç, Bahattin (2024) "Customized scaffolds for large bone defects using 3D-printed modular blocks from 2D-medical images", Bio-Design and Manufacturing, Vol.7, No.1, 74-87 (SCI)
    Yıldız, Gülşah and Arslan, Yavuz Emre and Derkus, Burak and Sezgin, Billur and Menceloğlu, Yusuf Z. and Bayar, Gurkan Rasit (2024) "Development and characterization of skin substitutes from electrospun polycaprolactone/silk fibroin", Journal of Bioactive and Compatible Polymers, Vol.39, No.1, 46-62 (SCI)
    Arıtürk, Gizem Semra and Girişken, Çağla and Bilge, Kaan and Yargici Kovanci, Ceren and Menceloğlu, Yusuf Z. and Avaz Seven, Senem (2024) "Hybrid green composites of PLA incorporated with upcycled waste cellulose and vermiculite", European Polymer Journal, Vol.203 (SCI)
    Ebrahimpour Ahmadi, Vahid and Güler, Tayfun and Çelik, Süleyman and Ronshin, Fedor and Serdyukov, Vladimir and Surtaev, Anton and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Effect of mixed wettability surfaces on flow boiling heat transfer at subatmospheric pressures", Applied Thermal Engineering, Vol.236 (SCI)
    Vakilha, M. and Saghatchi, Roozbeh and Alexiadis, A. and Yıldız, Mehmet and Shadloo, M. S. (2024) "A fully explicit incompressible smoothed particle hydrodynamics approach for modeling transient heat transfer and thermo-capillary flows", Computers and Fluids, Vol.269 (SCI)
    Altaf, Cigdem Tuc and Coskun, Ozlem and Kumtepe, Alihan and Rostas, Arpad Mihai and Iatsunskyi, Igor and Coy, Emerson and Erdem, Emre and Sankir, Mehmet and Sankir, Nurdan Demirci (2023) "Author Correction: Photo-supercapacitors based on nanoscaled ZnO (Scientific Reports, (2022), 12, 1, (11487), 10.1038/s41598-022-15180-z)", Scientific Reports, Vol.13, No.1 (SCI)
    Avsar, Seda Gürgen and Repp, Sergej and Dietel, Lisa and Güngör, Ahmet and Weber, Stefan and Ocakoglu, Kasim and Nadupalli, Shankari and Erdem, Emre (2023) "Competition between charge transfer and energy transfer: influence of intrinsic defects in ZnO nanocrystals on rhodamine-B dye color signals", Physical Review B, Vol.108, No.24 (SCI)
    Parlayan, Onur and Ozdemir, Mirhan and Gayir, Cemal Efe and Simsek, Ugur and Kızıltaş, Güllü (2023) "A new sensitivity-based mapping scheme for topology optimization of graded TPMS designs", International Journal of Advanced Manufacturing Technology, Vol.129, 3197-3220 (SCI)
    Aydın, Mehmet Serhat and Şahin, Mervenaz and Doğan, Zeynep and Kızıltaş, Güllü (2023) "Microstructural characterization of PCL-HA bone scaffolds based on nonsolvent-induced phase separation", ACS Omega, Vol.8, No.50, 47595-47605 (SCI)
    Kozalak, Gül and Koşar, Ali (2023) "Autophagy-related mechanisms for treatment of multiple myeloma", Cancer Drug Resistance, Vol.6, No.4, 838-857 (ESCI)
    Mısırlıoğlu, Burç and Yapıcı, Murat Kaya and Şendur, Kürşat and Okatan, Mahmut Baris (2023) "Weak dependence of voltage amplification in a semiconductor channel on strain state and thickness of a multidomain ferroelectric in a bilayer gate", ACS Applied Electronic Materials, Vol.5, No.12, 6832-6841 (SCI)
    Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "Revolutionizing transportation composite structures: lightweight, sustainable, and multi-scale hybrid design through waste tire-driven graphene, hemp fiber, and bio-based overmoulding". Published Online First https://dx.doi.org/10.1177/08927057231222821
    Yıldırım, Ceren and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Beylergil, Bertan and Yıldız, Mehmet (2023) "Characterizing damage evolution of CF/PEKK composites under tensile loading through multi-instrument structural health monitoring techniques", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)
    Al-Nadhari, Abdulrahman Saeed Abdulqader and Şenol, Halil and Topal, Serra and Ulus, Hasan and Yıldız, Mehmet (2023) "The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)
    Kölgesiz, Sarp and Berksun, Ekin and Tas, Cuneyt Erdinc and Ünal, Serkan and Ünal, Hayriye (2023) "Flexible waterborne polyurethane nanocomposite foams incorporated with halloysites as fresh-keeping packaging inserts for fresh fruits", Food Packaging and Shelf Life, Vol.40 (SCI)
    Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2023) "Amphiphilic polyoxazoline copolymer-imidazole complexes as tailorable thermal latent curing agents for one-component epoxy resins", ACS Omega, Vol.8, No.49, 47173-47186 (SCI)
    Işık, Murat and Yıldız, Mehmet and Seçer, Ragıp Orkun and Sen, Ceren and Bilgin, Guney Mert and Orhangul, Akin and Akbulut, Guray and Javidrad, Hamidreza and Koç, Bahattin (2023) "Fabrication of electron beam melted titanium aluminide: the effects of machining parameters and heat treatment on surface roughness and hardness", Metals, Vol.13, No.12 (SCI)
    Bagherzadeh, Amin and Budak, Erhan and Ozlu, Emre and Koç, Bahattin (2023) "Machining behavior of Inconel 718 in hybrid additive and subtractive manufacturing", CIRP Journal of Manufacturing Science and Technology, Vol.46, 178-190 (SCI)
    Ammar, Ameen Uddin and Stan, Manuela and Popa, Adriana and Toloman, Dana and Macavei, Sergiu and Leostean, Cristian and Ciorita, Alexandra and Erdem, Emre and Rostas, Arpad Mihai (2023) "All-in-one supercapacitor devices based on nanosized Mn4+-doped WO3", Journal of Energy Storage, Vol.72 (SCI)
    Zarrabi, Ali and Perrin, David and Kavoosi, Mahboubeh and Sommer, Micah and Sezen, Serap and Mehrbod, Parvaneh and Bhushan, Bhavya and Machaj, Filip and Rosik, Jakub and Kawalec, Philip and Afifi, Saba and Bolandi, Seyed Mohammadreza and Koleini, Peiman and Taheri, Mohsen and Madrakian, Tayyebeh and Łos, Marek J. and Lindsey, Benjamin and Çakır, Nilüfer and Zarepour, Atefeh and Hushmandi, Kiavash and Fallah, Ali and Koç, Bahattin and Khosravi, Arezoo and Ahmadi, Mazaher and Logue, Susan and Orive, Gorka and Pecic, Stevan and Gordon, Joseph W. and Ghavami, Saeid (2023) "Rhabdomyosarcoma: current therapy, challenges, and future approaches to treatment strategies", Cancers, Vol.15, No.21 (SCI)
    Ali, Hafiz Qasim and Wagner, H. N. R. and Akalın, C. and Tabrizi, I. E. and Hühne, C. and Yıldız, Mehmet (2023) "Buckling and fracture analysis of thick and long composite cylinders with cutouts under axial Compression: an experimental and numerical campaign", Composite Structures, Vol.324 (SCI)
    Ranjbar Aghjehkohal, Amin and Taghizadeh Tabrizi, Arvin and Yıldız, Mehmet (2023) "Electrochemical hydrogen storage of synthesized heterostructure of hexagonal boron nitride-carbon nano tube", Journal of Alloys and Compounds, Vol.962 (SCI)
    Aktürk, Merve and Kemal Gozuacik, Namik and Aleinawi, Mohamad and Rostas, Arpad Mihai and Alkoy, Sedat and Mensur, Ebru and Erdem, Emre (2023) "Elucidating the capacitive behavior of Gd-doped BNT-BKT-BT electrodes in All-in-One supercapacitor devices", Physica Scripta, Vol.98, No.10 (SCI)
    Karagoz, Emine and Altaf, Cigdem Tuc and Yaman, Ecenaz and Yıldırım, İpek Deniz and Erdem, Emre and Celebi, Cem and Fidan, Mehmet and Sankir, Mehmet and Sankir, Nurdan Demirci (2023) "Flexible metal/semiconductor/metal type photodetectors based on manganese doped ZnO nanorods", Journal of Alloys and Compounds, Vol.959 (SCI)
    Hroub, Abdalla and Aleinawi, Mohamad and Stefan, Maria and Mihet, Maria and Ciorita, Alexandra and Bakan Mısırlıoğlu, Feray and Erdem, Emre and Rostas, Arpad Mihai (2023) "Vanadium-doped magnesium oxide nanoparticles as electrodes in supercapacitor devices", Journal of Alloys and Compounds, Vol.958 (SCI)
    Güngör, Ahmet (2023) "The effect of Cumin Black (Nigella Sativa L.) as bio-based filler on chemical, rheological and mechanical properties of epdm composites", Turkish Journal of Engineering, Vol.7, No.4, 279-285 (NA)
    Çelik, Dilara and Karaca, Ali and Koç, Bahattin (2023) "Directed energy deposition of parts with internal channels using removable graphite supports". Published Online First https://dx.doi.org/10.1089/3dp.2023.0057
    Şahin Dündar, Gülayşe and Saner Okan, Burcu (2023) "Compatibilizing effect of grafted recycled graphene on the viscoelasticity and mechanical performance of polypropylene composites". Published Online First https://dx.doi.org/10.1177/07316844231208484
    Seyednourani, Mahsa and Akgün, Sercan and Ulus, Hasan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2023) "Experimental investigation on compression-after-impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring", Composite Structures, Vol.321 (SCI)
    Zabara, Mohammed Ahmed and Ölmez, Burak and Alkan Gürsel, Selmiye and Yürüm, Alp (2023) "Morphology-dependent investigation of Li-ion insertion into single crystal hematite α-Fe2O3 nanostructures", Journal of Physical Chemistry C, Vol.127, No.42, 20608-20619 (SCI)
    Arel, Işık and Ay, Ayşe and Wang, Jingyi and Gil-Herrera, Luz Karime and Dumanli, Ahu Gümrah and Akbulut, Özge (2023) "Encapsulation of carbon dots in a core-shell mesh through coaxial direct ink writing for improved crop growth", ACS Sustainable Chemistry and Engineering, Vol.11, No.38, 13939-13949 (SCI)
    Ammar, Ameen Uddin and Bakan Mısırlıoğlu, Feray and Aleinawi, Mohamad and Franzo, Giorgia and Condorelli, Guglielmo Guido and Yesilbag, Fatma Nur Tuzluca and Yesilbag, Yasar Ozkan and Mirabella, Salvo and Erdem, Emre (2023) "All-in-one supercapacitors with high performance enabled by Mn/Cu doped ZnO and MXene", Materials Research Bulletin, Vol.165 (SCI)
    Karakaya, Merve and Erdem, Emre and Akdogan, Yasar and Adem, Umut (2023) "Effects of different precursors on the aging and electrocaloric properties of Mn-doped Ba0.95Sr0.05TiO3 ceramics", Journal of Materials Science: Materials in Electronics, Vol.34, No.27 (SCI)
    Altaf, Cigdem Tuc and Colak, Tuluhan Olcayto and Rostas, Arpad Mihai and Mihet, Maria and Lazar, Mihaela Diana and Iatsunskyi, Igor and Coy, Emerson and Yıldırım, İpek Deniz and Bakan Mısırlıoğlu, Feray and Erdem, Emre and Sankir, Mehmet and Sankir, Nurdan Demirci (2023) "GO/ZnO-based all-solid-state photo-supercapacitors: effect of GO:ZnO ratio on composite properties and device performance", Journal of Energy Storage, Vol.68 (SCI)
    Kocanalı, Atakan and Başkan, Havva and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2023) "A selective upcycling approach: growing 2D and 3D graphene oxide structures with size-controlled talc substrates from waste polypropylene with LCA protocols", Journal of Polymers and the Environment, Vol.31, No.9, 4052-4068 (SCI)
    Aktas, Busra and Bal, Batuhan and Sezen, Meltem and Ow-Yang, Cleva W. and Unver, M. Unsal and Buyukaksoy, Aligul (2023) "Solution processed La0.8Sr0.2MnO3-Bi1.44Y0.56O3 composite thin films with self-assembled nanolayered structures". Published Online First https://dx.doi.org/10.1557/s43579-023-00461-z
    Yalçınkaya, Esra and Başkan Bayrak, Havva and Saner Okan, Burcu (2023) "Growing of 2D/3D graphene structures on natural substrates from aromatic plastic wastes by scalable thermal-based upcycling process with a comparative CO2 footprint analysis", Sustainable Materials and Technologies, Vol.37 (SCI)
    Karimzadehkhoei, Jalal and Sorayani Bafqi, Mohammad Sajad and Saeidiharzand, Shaghayegh and Mohammadilooey, Mandana and Hezarkhani, Marjan and Saner Okan, Burcu and Koşar, Ali and Sadaghiani, Abdolali (2023) "Upcycled graphene integrated fiber-based photothermal hybrid nanocomposites for solar-driven interfacial water evaporation", Desalination, Vol.562 (SCI)
    Dericiler, Kuray and Zafar, Salman and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "The effect of reinforcement aspect ratio on the performance of PA66 composites with recycled carbon fiber and upcycled graphene nanoplatelets: an interface characterization from process to modeling", Journal of Applied Polymer Science, Vol.140, No.35 (SCI)
    Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2023) "Effect of atmospheric plasma treatment on Mode-I and Mode-II fracture toughness properties of adhesively bonded carbon fiber/PEKK composite joints", Engineering Fracture Mechanics, Vol.289 (SCI)
    Gul, Saher and Arican, Selin and Cansever, Murat and Yıldız, Mehmet and Saner Okan, Burcu (2023) "Dimension effect on thermal conductivity of hexagonal boron nitride/titanium dioxide reinforced hybrid PEEK composites developed with a scalable compounding approach". Published Online First https://dx.doi.org/10.1002/pc.27728
    Bilici, Çiğdem and Altunbek, Mine and Afghah, Ferdows and Tatar, Asena Gülenay and Koç, Bahattin (2023) "Embedded 3D printing of cryogel-based scaffolds", ACS Biomaterials Science and Engineering, Vol.9, No.8, 5028-5038 (SCI)
    Çetin, Ebru and Güçlü, Tandaç Fürkan and Kantarcıoğlu, Işık and Gaszek, Ilona K. and Toprak, Erdal and Atılgan, Ali Rana and Dedeoglu, Burcu and Atılgan, Canan (2023) "Kinetic barrier to enzyme inhibition is manipulated by dynamical local interactions in E. coli DHFR", Journal of Chemical Information and Modeling, Vol.63, No.15, 4839-4849 (SCI)
    Bajwa, Rayan and Yapıcı, Murat Kaya (2023) "Origami-inspired fabrication of high-performance wafer-level packaged three-dimensional radio-frequency inductors", Journal of Microelectromechanical Systems, Vol.32, No.4, 381-388 (SCI)
    Paksoy, Aybike and Aktürk, Merve and Arabi, Seyedehnegar and Erdem, Emre and Balcı-Çağıran, Özge (2023) "Synthesis and capacitive performance of ZrB2 and its composites as supercapacitor electrodes", Solid State Sciences, Vol.142 (SCI)
    Maleki, Mohammadamin and Rokhsar Talabazar, Farzad and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Bayraktar, Songül and Tuzcuoğlu, Ehsan and Koşar, Ali and Ghorbani, Morteza (2023) "Detergent dissolution intensification via energy-efficient hydrodynamic cavitation reactors", ACS Omega, Vol.8, No.32, 29595-29607 (SCI)
    Hoque, Muhammad Jahidul and Li, Longnan and Ma, Jingcheng and Cha, Hyeongyun and Sett, Soumyadip and Yan, Xiao and Rabbi, Kazi Fazle and Ho, Jin Yao and Khodakarami, Siavash and Suwala, Jason and Yang, Wentao and Mohammad Moradi, Omid and Özaydın İnce, Gözde and Miljkovic, Nenad (2023) "Ultra-resilient multi-layer fluorinated diamond like carbon hydrophobic surfaces", Nature Communications, Vol.14, No.1 (SCI)
    Şükür, Emine Feyza and Elmas, Sinem Gül and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "An experimental implication of long-term hot-wet-aged carbon fiber/polyether ketone ketone composites: the impact of automated fiber placement process parameters and process-induced defects", Journal of Applied Polymer Science, Vol.140, No.29 (SCI)
    Ali, Hafiz Qasim and Aydin, Mehmet Serhat and Awais Khan, Raja Muhammad and Yıldız, Mehmet (2023) "The role of "thickness effect" on the damage progression and crack growth inside the plain-woven carbon fiber composites", Composites Science and Technology, Vol.241 (SCI)
    Özhan, Aleyna Beste and Demir, Gizem and Akbulut, Özge (2023) "Local optimization of low power laser machining of MgO at the green state enables cost- and energy-efficient benchtop fabrication", Journal of Manufacturing Processes, Vol.98, 206-215 (SCI)
    Altaf, Cigdem Tuc and Colak, Tuluhan Olcayto and Erdem, Emre and Unal, Ugur and Bakan Mısırlıoğlu, Feray and Condorelli, Guglielmo Guido and Sankir, Nurdan Demirci and Sankir, Mehmet (2023) "Disulfonated polyarylene ether sulfone membrane for graphitic carbon nitride/zinc oxide based photo-supercapacitors", Electrochimica Acta, Vol.456 (SCI)
    Sadeghi, Ebrahim and Chamani, Sanaz and Erdem, Emre and Peighambardoust, Naeimeh Sadat and Aydemir, Umut (2023) "NiMo/CoMoO4 heterostructure with confined oxygen vacancy for active and durable alkaline hydrogen evolution reaction", ACS Applied Energy Materials, Vol.6, No.14, 7658-7671 (SCI)
    Fallah, Ali and Asif, Suleman and Gokcer, Gizem and Koç, Bahattin (2023) "4D printing of continuous fiber-reinforced electroactive smart composites by coaxial additive manufacturing", Composite Structures, Vol.316 (SCI)
    Lejding, Tina and Persson, Lena and Andersen, Klaus Ejner and Bruze, Magnus and Derevyanko, Ludmyla and Elsner, Peter and Goh, Chee Leok and Gonçalo, Margarida and Goossens, An and Gülgün, Mehmet Ali and Isaksson, Marléne and Ljubojevic Hadzavdic, Suzana and Maibach, Howard and Matsunaga, Kayoko and Mowitz, Martin and Nixon, Rosemary and Pailin, Puangpet and Pratt, Melanie and Schuttelaar, Marie Louise A. and Sukakul, Thanisorn and Verma, Kaushal and Zimerson, Erik and Özkaya, Esen and Svedman, Cecilia (2023) "Analysis of hexavalent chromium in cement samples from countries within and outside the EU: a study from the international contact dermatitis research group", Dermatitis, Vol.34, No.4, 323-328 (SCI)
    Ali, Hafiz Qasim and Kheyabani, Aryan and Akalın, Cagdas and Kefal, Adnan and Yıldız, Mehmet (2023) "Numerical and experimental methodologies to investigate the damage progression inside the axisymmetric composite cylinders with cutouts under torsion", Composite Structures, Vol.315 (SCI)
    Şentürk, Efsun and Bilici, Çiğdem and Afghah, Ferdows and Khan, Zaeema and Çelik, Süleyman and Wu, Chengtie and Koç, Bahattin (2023) "3D bioprinting of tyramine modified hydrogels under visible light for osteochondral interface", Biofabrication, Vol.15, No.3 (SCI)
    Zabara, Mohammed Ahmed and Yarar Kaplan, Begüm and Alkan Gürsel, Selmiye and Yürüm, Alp (2023) "Facet-dependent interfacial and photoelectrochemical properties of TiO2 nanoparticles". Published Online First https://dx.doi.org/10.1002/admi.202300555
    Yildiz, Kaan and Alrai, Adel and Erturk, Melike and Köken, Deniz and Bozali, Beyza and Zakaria, Afshin Zamani and Cebeci, Fevzi Çakmak and Ozden-Yenigun, Elif and Cebeci, Hulya (2023) "Morphology-property relationship in radially oriented anchored carbon nanotubes on polybenzimidazole nanofibers", Journal of Materials Science, Vol.58, No.24, 9978-9990 (SCI)
    Namlı, İlayda and Karavelioglu, Zeynep and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Varol, Rahmetullah and Yilmaz, Abdurrahim and Şahin, Sevilay Burcu and Özogul, Beyzanur and Bozkaya, Dila Naz and Acar, Havva Funda and Uvet, Huseyin and Çetinel, Sibel and Kutlu, Özlem and Ghorbani, Morteza and Koşar, Ali (2023) "On the application of hydrodynamic cavitation on a chip in cellular injury and drug delivery", Lab On a Chip, Vol.23, No.11, 2640-2653 (SCI)
    Barzgar Vishlaghi, Mahsa and Kahraman, Abdullah and Österbacka, Nicklas and Usman, Emre and Erdem, Emre and Sennaroğlu, Alphan and Wiktor, Julia and Kaya, Sarp (2023) "Accelerating water oxidation on BiVO4 photoanodes via surface modification with Co dopants". Published Online First https://dx.doi.org/10.1039/d3ta01418e
    Güngör, Ahmet and Özdemir, Tonguç (2023) "Preparation of bio-based EPDM rubber composites by utilizing date (Phoenix dactylifera L.) Kernel as bio-based filler", Journal of Inorganic and Organometallic Polymers and Materials, Vol.33, No.6, 1527-1537 (SCI)
    Batyrow, Merdan and Dericiler, Kuray and Palabiyik, Büşra Akkoca and Saner Okan, Burcu and Öztürk, Hande and Erucar, İlknur (2023) "Combining tensile test results with atomistic predictions of elastic modulus of graphene/polyamide-6,6 nanocomposites", Materials Today Communications, Vol.35 (SCI)
    Bajwa, Rayan and Saleh, Heba Ahmed Hamed Shaker and Shojaeian, Milad and Tekin, İbrahim and Yapıcı, Murat Kaya (2023) "Nonlinear restructuring of patterned thin films by residual stress engineering into out-of-plane wavy-shaped electrostatic microactuators for high-performance radio-frequency switches", Microsystems and Nanoengineering, Vol.9, No.1 (SCI)
    Akgün, Sercan and Şenol, Cahit Orhun and Kılıç, Göktuğ and Tabrizi, Isa Emami and Yıldız, Mehmet (2023) "A novel damage evaluation of CFRPs under mode-I loading by using multi-instrument structural health monitoring methods", Engineering Fracture Mechanics, Vol.286 (SCI)
    Khan, Raja Muhammad Awais and Shafighfard, Torkan and Ali, Hafiz Qasim and Mieloszyk, Magdalena and Yıldız, Mehmet (2023) "Strength prediction and experimental damage investigations of plain woven CFRPs with interacting holes using multi-instrument measurements", Polymer Composites, Vol.44, No.6, 3594-3609 (SCI)
    Altunbek, Mine and Afghah, Seyedeh Ferdows and Fallah, Ali and Acar, Anıl Ahmet and Koç, Bahattin (2023) "Design and 3D printing of personalized hybrid and gradient structures for critical size bone defects", ACS Applied Bio Materials, Vol.6, No.5, 1873-1885 (ESCI)
    Alhamwi, Almotasem Belah and Atılgan, Canan and Sensoy, Ozge (2023) "Nonlocal effects of antibiotic-resistance-causing mutations reveal an alternative region for targeting on FtsW-penicillin-binding protein 3 complex of haemophilus influenzae", Journal of Chemical Information and Modeling, Vol.63, No.10, 3094-3104 (SCI)
    Altaf, Cigdem Tuc and Rostas, Arpad Mihai and Mihet, Maria and Lazar, Mihaela Diana and Iatsunskyi, Igor and Coy, Emerson and Erdem, Emre and Sankir, Mehmet and Sankir, Nurdan Demirci (2023) "Erratum: Solar-assisted all-solid supercapacitors using composite nanostructures of ZnO nanowires with GO and rGO (Journal of Materials Chemistry C (2022) 10 (10748–10758) DOI: 10.1039/D2TC02114E)", Journal of Materials Chemistry C, Vol.11, No.20, 6761-6761 (SCI)
    Ozdemir, Mirhan and Simsek, Ugur and Kızıltaş, Güllü and Gayir, Cemal Efe and Celik, Alican and Sendur, Polat (2023) "A novel design framework for generating functionally graded multi-morphology lattices via hybrid optimization and blending methods", Additive Manufacturing, Vol.70 (SCI)
    Muganlı, Zülal and Saeidiharzand, Shaghayegh and Rekuviene, Regina and Samaitis, Vykintas and Jankauskas, Audrius and Koşar, Ali and Gharıb, Ghazaleh and Sadaghiani, Abdolali (2023) "Development and implementation of microbial antifreeze protein based coating for anti-icing", Advanced Materials Interfaces, Vol.10, No.14 (SCI)
    Ergene, Arzu and Khabbazabkenar, Sirous and Şenol, Ayça and Günay, Ece and Kurt, Hasan and Topcu, Gökhan and Ow-Yang, Cleva W. (2023) "Oxide glass formers extending persistent luminescence in Eu and Dy co-doped strontium aluminates", Journal of Luminescence, Vol.257 (SCI)
    Saeidiharzand, Shaghayegh and Sadaghiani, Abdolali and Yürüm, Alp and Koşar, Ali (2023) "Multiscale superhydrophobic zeolitic imidazolate framework coating for static and dynamic anti-icing purposes", Advanced Materials Interfaces, Vol.10, No.15 (SCI)
    Dericiler, Kuray and Hezarkhani, Marjan and Emami Tabrizi, Isa and Doğan, Semih and Berktaş, İlayda and Erdem, Emre and Advani, Suresh G. and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "Effect of interleaved electrolyte forms on macro-scaled structural hybrid supercapacitors with asymmetric configurations of graphene-coated carbon fabric electrodes". Published Online First https://dx.doi.org/10.1007/s10443-023-10130-y
    Tuna Genç, Münevver and Sarilmaz, Adem and Doğan, Semih and Aksoy Çekceoğlu, İlknur and Ozen, Abdurrahman and Aslan, Emre and Saner Okan, Burcu and Jaafar, Juhana and Ozel, Faruk and Ersoz, Mustafa and Hatay Patır, İmren (2023) "Thermally-exfoliated graphene Oxide/ZnO nanocomposite catalysts for photocatalytic hydrogen evolution and antibacterial activities". Published Online First https://dx.doi.org/10.1016/j.ijhydene.2023.04.185
    Yılmaz, Çağatay and Ali, Hafiz Qasim and Yıldız, Mehmet (2023) "Monitoring and verification of micro-strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory", Polymer Composites, Vol.44, No.5, 2956-2965 (SCI)
    Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2023) "Optimization of Charpy-impact strength of 3D-printed carbon fiber/polyamide composites by Taguchi method", Polymer Composites, Vol.44, No.5, 2846-2859 (SCI)
    Yarar Kaplan, Begüm and Kırlıoğlu, Ahmet Can and Alinezhadfar, Mohammad and Zabara, Mohammed Ahmed and Rajabalizadeh Mojarrad, Naeimeh and Iskandarani, Bilal and Yürüm, Alp and Ozkan, Cengiz Sinan and Ozkan, Mihrimah and Alkan Gürsel, Selmiye (2023) "Hydrogen production via electrolysis: Operando monitoring and analyses", Chem Catalysis, Vol.3, No.5 (ESCI)
    Altunbek, Mine and Afghah, Ferdows and Çalışkan, Özüm Şehnaz and Yoo, James J. and Koç, Bahattin (2023) "Design and bioprinting for tissue interfaces", Biofabrication, Vol.15, No.2 (SCI)
    Akgül, Gökçen and Oskay, Kürşad Oğuz and Aktürk, Merve and Karamustafa, Ayşenur and Sözer, Sözer and Maden, Tuğba Bolat and Erdem, Emre (2023) "Electrochemical energy storage capacity of surface engineered renewable carbon derived from industrial tea waste by HNO3 and K2CO3", Surface Engineering and Applied Electrochemistry, Vol.59, No.2, 199-209 (ESCI)
    Ammar, Ameen Uddin and Yıldırım, İpek Deniz and Aleinawi, Mohamad and Aktürk, Merve and Turhan, Nur Selin and Nadupalli, Shankari and Rostas, Arpad Mihai and Erdem, Emre (2023) "Multifrequency EPR spectroscopy study of Mn, Fe, and Cu doped nanocrystalline ZnO", Materials Research Bulletin, Vol.160 (SCI)
    Güngör, Ahmet and Özdemir, Tonguç and Genç, Rükan (2023) "Investigation of use in 5-FU release: synthesis of temperature and pH responsive P(NVCL-co-VIm)/PVP hydrogels". Published Online First https://dx.doi.org/10.1007/s00289-023-04806-5
    Bakar, Recep and Darvishi, Saeid and Aydemir, Umut and Yahsi, Ugur and Tav, Cumali and Menceloğlu, Yusuf Z. and Senses, Erkan (2023) "Decoding polymer architecture effect on ion clustering, chain dynamics, and ionic conductivity in polymer electrolytes", ACS Applied Energy Materials, Vol.6, No.7, 4053-4064 (SCI)
    Sharbati, Pouya and Sadaghiani, Abdolali and Koşar, Ali (2023) "New generation dielectrophoretic-based microfluidic device for multi-type cell separation", Biosensors, Vol.13, No.4 (SCI)
    Tunioli, Francesca and Khaliha, Sara and Mantovani, Sebastiano and Bianchi, Antonio and Kovtun, Alessandro and Xia, Zhenyuan and Sorayani Bafqi, Mohammad Sajad and Saner Okan, Burcu and Marforio, Tainah Dorina and Calvaresi, Matteo and Palermo, Vincenzo and Navacchia, Maria Luisa and Melucci, Manuela (2023) "Adsorption of emerging contaminants by graphene related materials and their alginate composite hydrogels", Journal of Environmental Chemical Engineering, Vol.11, No.2 (SCI)
    Ivanoska-Dacikj, Aleksandra and Oguz-Gouillart, Yesim and Hossain, Gaffar and Kaplan, Müslüm and Sivri, Çağlar and Ros-Lis, José Vicente and Mikucioniene, Daiva and Munir, Muhammad Usman and Kızıldağ, Nuray and Ünal, Serkan and Safarik, Ivo and Akgül, Esra and Yıldırım, Nida and Bedeloğlu, Ayşe Çelik and Ünsal, Ömer Faruk and Herwig, Gordon and Rossi, René M. and Wick, Peter and Clement, Pietro and Sarac, A. Sezai (2023) "Advanced and smart textiles during and after the COVID-19 pandemic: issues, challenges, and innovations", Healthcare (Switzerland), Vol.11, No.8 (SCI, SSCI)
    Bajwa, Rayan and Yapıcı, Murat Kaya (2023) "Machine learning-based modeling and generic design optimization methodology for radio-frequency microelectromechanical devices", Sensors, Vol.23, No.8 (SCI)
    Charkhesht, Vahid and Yarar Kaplan, Begüm and Alkan Gürsel, Selmiye and Yürüm, Alp (2023) "Electrospun nanotubular titania and polymeric interfaces for high energy density li-ion electrodes", Energy and Fuels, Vol.37, No.8, 6197-6207 (SCI)
    Güler, Saygun and Jedari Golparvar, Ata and Öztürk, Özberk and Dogan, Huseyin and Yapıcı, Murat Kaya (2023) "Optimal digital filter selection for remote photoplethysmography (rPPG) signal conditioning", Biomedical Physics and Engineering Express, Vol.9, No.2 (ESCI)
    Güngör, Ahmet and Özdemir, Tonguç and Genç, Rükan (2023) "Controlled 5-FU release from P(NIPAM-co-VIm)-g-PEG dual responsive hydrogels", ChemistrySelect, Vol.8, No.9 (SCI)
    Eryildiz, Bahriye and Ozbey-Unal, Bahar and Menceloğlu, Yusuf Z. and Keskinler, Bülent and Koyuncu, İsmail (2023) "Development of robust superhydrophobic PFA/TMI/PVDF membrane by electrospinning/electrospraying techniques for air gap membrane distillation", Journal of Applied Polymer Science, Vol.140, No.12 (SCI)
    Keskin, Başak and Korkut, Sevde and Ormancı-Acar, Türkan and Turken, Turker and Taş, Cüneyt Erdinç and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, Ismail (2023) "Pilot scale nanofiltration membrane fabrication containing ionic co-monomers and halloysite nanotubes for textile dye filtration", Water Science and Technology, Vol.87, No.6, 1529-1541 (SCI)
    Goral, Levent and Sezen, Meltem and Ow-Yang, Cleva W. and Günhan, Büşra and Buyukaksoy, Aligul (2023) "Evolution of elemental distribution in single liquid precursor-derived nanocomposite solid oxide cell electrodes at nanoscale and its impact on electrochemical performance stability", Journal of Solid State Electrochemistry, Vol.27, No.3, 655-666 (SCI)
    Ateş, Ayşenur and Çelik, Süleyman and Yağcı, Vedat and Çağlar Malyemez, Muhammed and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "Flow boiling of dielectric fluid HFE – 7000 in a minichannel with pin fin structured surfaces", Applied Thermal Engineering, Vol.223 (SCI)
    Çetiner, Büşra and Şahin Dündar, Gülayşe and Yusufoğlu, Yusuf and Saner Okan, Burcu (2023) "Sustainable engineered design and scalable manufacturing of upcycled graphene reinforced polylactic acid/polyurethane blend composites having shape memory behavior", Polymers, Vol.15, No.5 (SCI)
    Karimi, Sasan and Yousefi Louyeh, Pouya and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2023) "A study of post-processing for AFP-fabricated thermoplastic composites with void content and air permeability characterization". Published Online First https://dx.doi.org/10.1177/07316844231166078
    Ali, Hafiz Qasim and Khan, Raja M. A. and Tabrizi, Isa E. and Yıldız, Mehmet (2023) "An experimental multi-instrumental approach to understand the size effect on the damage propagation of plain-woven CFRP composites under shear loading", Journal of Composite Materials, Vol.57, No.5, 955-966 (SCI)
    Balcerowski, Tadeusz and Özbek, Burak and Akbulut, Özge and Dumanli, Ahu Gümrah (2023) "Hierarchical organization of structurally colored cholesteric phases of cellulose via 3D printing", Small, Vol.19, No.8 (SCI)
    Liu, Gökşin and Ekmen, Erhan and Jalalypour, Farzaneh and Mertens, Haydyn D. T. and Jeffries, Cy M. and Svergun, Dmitri and Atılgan, Ali Rana and Atılgan, Canan and Sayers, Zehra (2023) "Conformational multiplicity of bacterial ferric binding protein revealed by small angle x-ray scattering and molecular dynamics calculations", Journal of Chemical Physics, Vol.158, No.8 (SCI)
    Daskalakis, Evangelos and Hassan, Mohamed H. and Omar, Abdalla M. and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2023) "Accelerated degradation of poly-ε-caprolactone composite scaffolds for large bone defects", Polymers, Vol.15, No.3 (SCI)
    Zoghipour, Pouya and Hasim, K. A. and Kefal, Adnan and Yıldız, Mehmet (2023) "Implementation of shear-locking-free triangular refined zigzag element for structural analysis of multilayered plates with curvilinear fibers", Composite Structures, Vol.305 (SCI)
    Kendibilir, Abdullah and Polat, Mehmet Furkan and Çavuş, Ömer Safa and Khalilvandi Behrouzyar, Sina and Motlagh, Peyman Lahe and Koç, Bahattin and Kefal, Adnan (2023) "Combination of peridynamics and genetic algorithm based topology optimization methods for additive manufacturing-friendly designs", Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)
    Yoğurtçuoğlu, Abdul Vahap and Şimşek, Uğur and Koç, Bahattin (2023) "Effects of design parameters on surface roughness of additively manufactured thin-walled structures", Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)
    Ertek, Dicle Ayca and Sanli, Nazmiye Ozlem and Menceloğlu, Yusuf Z. and Avaz, Merve Senem (2023) "Environmentally friendly, antibacterial materials from recycled keratin incorporated electrospun PLA films with tunable properties", European Polymer Journal, Vol.185 (SCI)
    Parizad Benam, Behnam and Ebrahimpour Ahmadi, Vahid and Motezakker, Ahmad Reza and Saeidiharzand, Shaghayegh and Guillermo Villanueva, Luis and Sun Park, Hyun and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "A parametric study on pool boiling heat transfer and critical heat flux on structured surfaces with artificial cavities", Applied Thermal Engineering, Vol.221 (SCI)
    Ateş, Ayşenur and Parizad Benam, Behnam and Mohammadilooey, Mandana and Çelik, Süleyman and Serdyukov, Vladimir and Surtaev, Anton and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "Pool boiling heat transfer on superhydrophobic, superhydrophilic, and superbiphilic surfaces at atmospheric and sub-atmospheric pressures", International Journal of Heat and Mass Transfer, Vol.201, No.Part-2 (SCI)
    Topal, Serra and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldırım, Ceren and Beylergil, Bertan and Kan, Cihan and Ünal, Serkan and Yıldız, Mehmet (2023) "Multiscale nano-integration in the scarf-bonded patches for enhancing the performance of the repaired secondary load-bearing aircraft composite structures", Carbon, Vol.204, 112-125 (SCI)
    Kölgesiz, Sarp and Taş, Cüneyt Erdinç and Köken, Deniz and Genc, Mehmet Hayri and Yalcin, İzzet and Kalender, Kemal and Ünal, Serkan and Ünal, Hayriye (2023) "Extending the shelf life of bananas with cinnamaldehyde-impregnated halloysite/polypropylene nanocomposite films", ACS Food Science and Technology, Vol.3, No.2, 340-349 (ESCI)
    Umar, Muhammad and Özek, Ekin Asım and Basit, Abdul and Hosseinpour Shafaghi, Ali and Yapıcı, Murat Kaya (2023) "Extremely long nanojet formation from a ballpoint photonic pen", Journal of the Optical Society of America B: Optical Physics, Vol.40, No.2, 284-292 (SCI)
    Yapıcı, Murat Kaya (2023) "Multilayer flexible SU8-gold microelectrode arrays for wearable bioelectronics", Sakarya University Journal of Science, Vol.27, No.1, 56-67 (NA)
    Honerkamp-Smith, Aurelia R. and Ratajczak, Amanda M. and Anthony, Autumn A. and Sasidharan, Sreeja and Miller, Ethan J. and Rivera, Xaymara and Şahin, Osman and Yapıcı, Murat Kaya and Socrier, Larissa and Rogers, Daniel (2023) "Using flow to investigate friction and protein transport in lipid membranes", Biophysical Journal, Vol.122, No.3S1, 226a-226a (SCI)
    Arlı, Cihan and Atılgan, Ali Rana and Mısırlıoğlu, Burç (2023) "Volumetric effects in electrocaloric response of ferroelectric thin films", Journal of Materials Chemistry C, Vol.11, No.3, 1134-1143 (SCI)
    Avcıoğlu, Suna and Aktürk, Merve and Erdem, Emre and Kaya, Figen and Kaya, Cengiz (2023) "Boron carbide as an electrode material: tailoring particle morphology to control capacitive behaviour", Materials, Vol.16, No.2 (SCI)
    Ammar, Ameen Uddin and Stefan, Maria and Macavei, Sergiu Gabriel and Tripon, Septimiu and Pana, Ovidiu and Leostean, Cristian and Vlaicu, Ioana Dorina and Rostas, Arpad Mihai and Erdem, Emre (2023) "Characterization of defect structures in nanoscaled W-doped TiO2 tested as supercapacitor electrode materials", Journal of Materials Science: Materials in Electronics, Vol.34, No.2 (SCI)
    Rokhsar Talabazar, Farzad and Maleki, Mohammadamin and Sheibani Aghdam, Araz and Grishenkov, Dmitry and Ghorbani, Morteza and Koşar, Ali (2023) "Cavitation inception and evolution in cavitation on a chip devices at low upstream pressures", Physics of Fluids, Vol.35, No.1 (SCI)
    Kozalak, Gül and Bütün, İsmail and Toyran, Erçil and Koşar, Ali (2023) "Review on bortezomib resistance in multiple myeloma and potential role of emerging technologies", Pharmaceuticals, Vol.16, No.1 (SCI)
    Zarepour, Atefeh and Egil, Abdurrahim Can and Çakmak, Melike Çokol and Esmaeili Rad, Monireh and Cetin, Yüksel and Aydinlik, Şeyma and Özaydın İnce, Gözde and Zarrabi, Ali (2023) "Fabrication of a dual-drug-loaded smart niosome-g-chitosan polymeric platform for lung cancer treatment", Polymers, Vol.15, No.2 (SCI)
    Saghatchi, Roozbeh and Kolukısa, Deniz Can and Yıldız, Mehmet (2023) "Development of smoothed particle hydrodynamics method for modeling active nematics", International Journal for Numerical Methods in Engineering, Vol.124, No.1, 159-182 (SCI)
    Saghatchi, Roozbeh and Yıldız, Mehmet (2023) "Vibration induced by active nematics", Journal of Fluid Mechanics, Vol.954 (SCI)
    Şahin Dündar, Gülayşe and Saner Okan, Burcu (2023) "An efficient interface model to develop scalable methodology of melt processing of polypropylene with graphene oxide produced by an improved and eco-friendly electrochemical exfoliation", Journal of Applied Polymer Science, Vol.140, No.2 (SCI)
    Sharani, Baidaa and Haghighi Poudeh, Leila and Elmas, Sinem and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "Aspects of halloysite nanotubes integration in epoxy nanocomposites: curing kinetics and deformation mechanism", Polymer Composites, Vol.44, No.1, 574-591 (SCI)
    Al-dulaimi, Wael Ali Saeed and Okatan, M. B. and Şendur, Kürşat and Onbasli, M. C. and Mısırlıoğlu, Burç (2023) "Size driven barrier to chirality reversal in electric control of magnetic vortices in ferromagnetic nanodiscs", Nanoscale, Vol.15, No.2, 707-717 (SCI)
    Öztürk, Özberk and Jedari Golparvar, Ata and Acar, Gizem and Güler, Saygun and Yapıcı, Murat Kaya (2023) "Single-arm diagnostic electrocardiography with printed graphene on wearable textiles", Sensors and Actuators A: Physical, Vol.349 (SCI)
    Gul, Saher and Arican, Selin and Cansever, Murat and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2023) "Design of highly thermally conductive hexagonal boron nitride-reinforced PEEK composites with tailored heat conduction through-plane and rheological behaviors by a scalable extrusion", ACS Applied Polymer Materials, Vol.5, No.1, 329-341 (SCI)
    Nedjad, Syamak Hossein and Yıldız, Mehmet and Saboori, Abdollah (2023) "Solidification behaviour of austenitic stainless steels during welding and directed energy deposition", Science and Technology of Welding and Joining, Vol.28, No.1, 1-17 (SCI)
  • Kitap Bölümleri
    Yıldırım, İpek Deniz and Güngör, Ahmet and Ammar, Ameen Uddin and Erdem, Emre, "MXene-based electrodes for hybrid supercapacitor devices", MXene-Based Hybrid Nano-Architectures for Environmental Remediation and Sensor Applications: From Design to Applications, Gupta, Ram K. and Bilal, Muhammad and Nguyen, Tuan Anh and Iqbal, Hafiz M.N. and Yasin, Ghulam (eds.), Amsterdam: Elsevier, February 2024, 467-479
    Çetiner, Büşra and Başkan Bayrak, Havva and Saner Okan, Burcu, "Application, recycling, environmental and safety issues, and future prospects of crystalline polymer composites", Polymer Crystallization: Methods, Characterization and Applications, Parameswaranpillai, Jyotishkumar and Jacob, Jenny and Krishnasamy, Senthilkumar and Jayakumar, Aswathy and Hameed, Nishar (eds.), Wiley, June 2023, 323-358
    Başkan Bayrak, Havva and Aliyeva, Nargiz and Sorayani Bafqi, Mohammad Sajad and Saner Okan, Burcu, "Classification of waste plastics for dimension-controlled graphene growth on natural mineral substrates in terms of polymer processing and thermal techniques", Graphene Extraction from Waste: A Sustainable Synthesis Approach for Graphene and Its Derivatives, Hussain, Chaudhery Mustansar and Srivastav, Ajeet Kumar and Tiwary, Chandra Sekhar and Tour, James M. (eds.), Elsevier, June 2023, 117-149
    Alkoy, Sedat and Okatan, M. B. and Mısırlıoğlu, Burç and Menşur-Alkoy, Ebru, "Electrocaloric ceramics", Encyclopedia of Materials: Electronics, Haseeb, A. S. M. A. (ed.), Amsterdam: Elsevier, April 2023, 208-217
    Ammar, Ameen Uddin and Aleinawi, Mohamad and Erdem, Emre, "Hydrogen electrical vehicles", Hydrogen Electrical Vehicles, Sankır, Mehmet and Sankir, Nurdan (eds.), Wiley, February 2023, 1-10
  • Konferans Bildirileri
    Önder, Melike Nur and Gülgün, Mehmet Ali and Papila, Melih, "Graphite enhanced GNP/PVA composite piezoresistor with a stable loading response", Maiaru, M. and Odegard, G. and Bednarcyk, B. and Pineda, E. (eds.), 38th Technical Conference of the American Society for Composites, ASC 2023, DEStech Publications, September 2023, 1360-1365
    Topal, Serra and Beylergil, Bertan and Yıldırım, Ceren and Ünal, Serkan and Yıldız, Mehmet, "Advancing aircraft repair patch prepregs: enhancing composite performance through resin type, cure cycle, and nanomaterial innovations", 3rd Global Conference on Advanced Nanotechnology & Nanomaterials, Berlin, Germany: Peers Alley Media, September 2023
    Alrai, Adel and Ozden-Yenigun, Elif and Cebeci, Fevzi Çakmak and Asadi, Amir and Köken, Deniz and Cebeci, Hulya, "One-step method for printing strain sensors on GFRP: assessment of sensor pattern effect", Falzon, B. G. and McCarthy, C. (eds.), 23rd International Conference on Composite Materials, ICCM 2023, International Committee on Composite Materials, August 2023
    Şaş Çaycı, Hatice Sinem and Özbilen, M. and Eskizeybek, V., "Evaluating interfacial performance of carbon-epoxy composites by fiber bundle tests: the impact of nanofiller dimension and surface chemistry", Falzon, B. G. and McCarthy, C. (eds.), 23rd International Conference on Composite Materials, ICCM 2023, International Committee on Composite Materials, August 2023
    Şahin, Osman and Albayrak, Oğuz Mustafa and Guzel, Ayse Seray and Gözüaçık, Devrim and Yapıcı, Murat Kaya, "Rapid turnaround fabrication of peptide nucleic acid (PNA)-immobilized nanowire biosensors by O2-plasma assisted lithography of e-beam resists", IEEE BioSensors Conference (BioSensors), Institute of Electrical and Electronics Engineers, July 2023
    Açar, Eren and Şimşek, Uğur and Gökçay, Barış and Kızıltaş, Güllü, "An inverse synthesis method for the determination of effective mechanical properties for additively manufactured aperiodic structures with finite thickness", 10th International Conference on Recent Advances in Air and Space Technologies (RAST), Institute of Electrical and Electronics Engineers, June 2023
    Öztürk, Sezen and Alipour Ghassabi, Ata and Kızıltaş, Güllü, "Effect of 3d scaffold morphology on bone tissue regeneration based on a multi-physics fem model", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 674-674
    Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü and Alipour Ghassabi, Ata, "Mesenchymal stem cell diffusion integrated mechano- biology analysis of 3d scaffolds", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 1391-1391
    Alipour Ghassabi, Ata and Kızıltaş, Güllü, "Microstructure effect on bone formation of a functionally graded scaffold using a mechanostat-based model", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 673-673
    Hosseinpour Shafaghi, Ali and Abdul, Basit and Bajwa, Rayan and Sayar Irani, Farid and Yapıcı, Murat Kaya, "Soft SU-8 thermal bimorph actuators with large out-of-plane deflection", Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP), Institute of Electrical and Electronics Engineers, May 2023
    Özek, Ekin Asım and Umar, Muhammad and Abdul, Basit and Hosseinpour Shafaghi, Ali and Yapıcı, Murat Kaya, "Photonic nanojets for scanning skin malignancies", Biophotonics Congress: Optics in the Life Sciences 2023 (OMA, NTM, BODA, OMP, BRAIN), Optical Society of America, April 2023
    Atılgan, Canan and Liu, Gökşin and Jalalpour, Farzaneh and Ekmen, Erhan and Berksöz, Melike and Atılgan, Ali Rana and Sayers, Zehra, "Increased ionic strength triggers multiple conformations in both apo and holo forms of bacterial ferric binding protein", Biophysical Society Annual Meeting, Elsevier, February 2023, 444A-445A
    Mirbakht, Seyed Sajjad and Jedari Golparvar, Ata and Umar, Muhammad and Yapıcı, Murat Kaya, "Flexible silk-based graphene bioelectronics for wearable multimodal physiological monitoring", IEEE 36th International Conference on Micro Electro Mechanical Systems (MEMS), Institute of Electrical and Electronics Engineers, January 2023, 335-338